Canna Calmag Agent

From: £12.95

Canna Calmag Agent is a premium hydroponic additive designed to optimise soft or RO water by enhancing Magnesium and Calcium levels. This concentrated formula promotes stronger plants, prevents nutrient deficiencies, and improves overall plant health and flower growth. Ideal for any hydroponic setup, Canna Calmag Agent ensures your plants achieve their full potential with every use.

Add to Wishlist
Add to Wishlist

Unlock Your Plants’ Full Potential with Premium Water Balancing

Ever wondered why your indoor plants aren’t reaching their full lush potential? It could be the water you’re using. Soft or RO water might be great for your household but not always for your hydroponic setup. Enter Canna Calmag Agent, your go-to solution for optimising water to support vigorous and healthy plant growth. This premium additive boosts magnesium and calcium levels in soft water, ensuring your plants develop strong, robust, and impressively flourish. Regardless of your experience level, this highly concentrated formula will enhance your water quality, turning every drop into a potent growth promoter.

Key Features & Benefits:

  • Enhanced Growth: Increases nutrient uptake, fostering the development of large, vibrant flowers.
  • Strengthens Plants: Promotes stronger plants by optimising the essential mineral balance in soft or RO water.
  • Prevents Deficiencies: Addresses and prevents potential nutrient shortfalls that can hinder plant growth.
  • Highly Concentrated: A little goes a long way making your investment last.
  • Quality Assured: Manufactured to Canna’s highest standards for unmatched performance in your grow room.
  • Ideal for Hydroponics: Perfect for use in grow rooms and tents, tailoring water to meet your plants’ specific needs.

This powerful solution not only sets the stage for explosive growth but also ensures that the optimal balance of necessary minerals supports each phase of your plant’s lifecycle. Get ready to see a noticeable difference in plant health and yield with Canna Calmag Agent.

Canna Calmag Agent is not just another additive; it’s a crucial component for any hydroponic gardener looking to optimise water quality for plant health. Here’s a deep dive into how it functions and why it’s essential for your indoor garden.

Balancing Water Chemistry

Soft or RO water often lacks crucial minerals like Magnesium and Calcium, which are indispensable for plant health and development. Canna Calmag fills this gap by increasing the water’s EC (Electrical Conductivity) levels. By doing so, it reintroduces these critical minerals into your water supply, mimicking the natural water conditions in which plants thrive.

Preventing Nutrient Deficiencies

Without sufficient Magnesium and Calcium, plants can exhibit stunted growth, poor development, and weak flowers. Regular use of Canna Calmag prevents these issues. It ensures that your plants always have access to these essential nutrients, promoting stronger cellular structure and resilience against diseases.

Optimising Plant Growth

The formula of Canna Calmag is highly efficient in nutrient uptake. Consequently, plants can absorb more nutrients from their environment. This efficiency boosts overall plant vitality, leads to larger flowers, and, ultimately, to an increased yield.

Enhanced Formula

What sets Canna Calmag apart is its highly concentrated formulation. A small amount goes a long way, making it a cost-effective solution for gardeners. Moreover, it works seamlessly with other nutrients and additives, ensuring that your plants receive a balanced diet without the risk of nutrient lockout.

This additive is a must-have for any hydroponic gardener aiming for top-quality crops. By ensuring your water is perfectly balanced, Canna Calmag Agent helps unleash your plants’ full potential. Whether you’re cultivating delicate herbs or robust vegetables, integrating this agent into your water management routine can significantly enhance your gardening success.

Using Canna Calmag correctly is key to achieving the best results in your hydroponic setup. Here’s a detailed guide to help you confidently integrate this essential additive into your growing routine.

Preparing Your Water

Start by filling your nutrient reservoir with water, ideally at a temperature of 20-22°C (68-72°F). This temperature range ensures optimal solubility and efficacy of the nutrients.

Adding Canna Calmag Agent

For every litre of water in your reservoir, add 0.1-0.5 ml of Calmag. Start with a lower dose and steadily increase based on the response of your plants and the specific requirements of your water source. Mix thoroughly to ensure the agent is fully dissolved and evenly distributed.

Adjusting EC Levels

After adding Calmag, measure the Electrical Conductivity (EC) of your water. Your target is to reach an EC level of about 0.4 mS/cm before adding any other nutrients or additives. This step is crucial, as it ensures the water has the right concentration of essential minerals.

Integrating Other Nutrients

Once the EC level is adjusted, you can proceed to add your regular nutrients and supplements according to their recommended dosages. Again, ensure each component is well mixed into the solution before adding the next. This method prevents nutrient lockout, where certain minerals can block the uptake of others.

Monitoring and Adjusting

Keep an eye on your plants’ response after introducing Calmag Agent into your routine. Look for signs of improved vigour and health, such as stronger stems and more vibrant foliage. If signs of deficiency persist or if plants show signs of nutrient excess (like burnt tips), adjust the dosage accordingly during the next reservoir refill.

By following these guidelines, you’ll ensure that your hydroponic plants receive the perfect balance of Calcium and Magnesium, leading to healthier growth and enhanced yields. For more information about this and other Canna products, visit their product page here.

What is Canna Calmag Agent?

Canna Calmag Agent is a highly concentrated solution designed to supplement water with essential minerals, specifically Calcium and Magnesium. It optimises soft or RO water used in hydroponic setups, ensuring that your plants receive the necessary nutrients for optimal growth and health.

What are the ingredients in Canna Calmag Agent?

Canna Calmag Agent contains a balanced blend of Calcium and Magnesium, which is critical for plant development and strength. These elements are in a chelated form, which ensures that they are readily available for plant uptake, enhancing their efficiency and effectiveness in promoting plant health.

How do I know if I need Canna Calmag Agent?

If your hydroponic system uses soft or RO water, adding Calmag Agent is essential. Signs that your plants might need this supplement include slow growth, weak stems, and foliage showing signs of deficiency (like chlorosis or leaf curling). Regularly using Canna Calmag can prevent these symptoms by maintaining the right balance of Calcium and Magnesium in your water.

  • Canna Coco A&B: This two-part nutrient system is ideal for use in coco-coir-based growing systems. Canna Coco A&B provides all the essential elements for optimal growth and bloom. Its unique formulation helps the nutrients bind to the coco fibres, maximising the plant’s nutrient uptake when used alongside Canna Calmag to balance water hardness.
  • Aqua Master Combo Pen P110 Pro: Monitor your nutrient solutions accurately with this high-quality combo pen. It measures EC, pH, conductivity, and temperature, which is crucial for adjusting your hydroponic system to the perfect conditions.
  • Canna Cannacure: An environmentally friendly, multi-tasking foliar spray, Canna Cannacure helps control plant pests and mildew while stimulating growth. When used with Canna Calmag, it ensures your plants are not only well-nourished but also protected from common grow room pests and diseases, creating a healthier environment for plant growth.
  • Canna Rhizotonic: A powerful root stimulator that enhances root development, Canna Rhizotonic improves plant strength by enabling better absorption of nutrients, including those provided by Canna Calmag. Suitable for all growing media, it’s particularly effective during the early stages of plant growth, setting the stage for a robust and vibrant garden.

Ready to Advance Your Grow? Choose Canna Calmag Agent

Release the full potential of your hydroponic setup with Canna Calmag Agent. Ensure your plants get the crucial minerals they need for robust growth and bountiful yields. Don’t let nutrient deficiencies hold you back. Add Canna Calmag to your basket today and watch your garden thrive like never before!

Browse Caliponics

No products in the basket.