Mist Maker Humidifier 3

The Mist Maker Humidifier 3 is a compact yet powerful unit which supplies water vapour to your growing room or tent.

This humidifier is ideal for hydroponic grow environments as it has the following handy features and benefits:

• It is a negative ion Ionizer as well as a humidifier
• Each of these is cool-running and provides 100% humidity
• Maintains the optimum growing environment needed for seedlings and cuttings
• A specially coated disc means fewer frequent changes: it lasts for up to 2000 hours
• It needs no wiring at all as it plugs straight into a standard mains socket
• Put in a propagator or growing space and see vapour float around your plants
• It makes use of ultrasound, with no chemicals or heat
• It gives you an output of 240ml per hour
• Provides a cool and pleasantly humid environment
• Very quiet when in operation
• 10m mains cable length

How Does The Humidifier 3 Work?

The Humidifier 3 produces water vapour using the ultrasonic vibration method; the droplets are one micron wide and will correct the humidity level in the air, which is too dry.

These units are cool-running and can provide very high humidity levels. The correct humidity helps maintain the optimum growing conditions for your plants right through the vegetative stage of their life cycle, as well as for seedlings and cuttings.

You can place this in a propagator and watch the water vapour float around the plants or cuttings, producing fast growth rates, delivering high levels of nutrient uptake and improving the transportation of those nutrients around the plant.

Your plant’s root system will learn to love the Mist Maker. This product is a cool-running unit in a sector where most humidifiers have some heating element.

It offers quiet operation and does not require special wiring as it plugs straight into a standard 3-plug socket. It uses a disc treated with a coating that needs to be changed less often and can last 2,000 hours.

Its water consumption is 1200ml per hour. In plants’ vegetative phase, reaching a relative humidity (RH) of 50 to 70% will allow your plants to transpire to their fullest extent. All damaged leaves on your plants will eventually die. If possible, you should aim for a humidity level of around 70% to stop this from happening.

Humidity is something that growers overlook occasionally, but it is an essential part of a plant’s growing environment.

This product is ideal for a 2 x 600 Watt grow light arrangement in a room up to 2.4 x 1.2M square. Clip-on fans are ideal for helping move the humid mist around the growing space.

How to Use?

This product works well sitting in a saucer or tray of water for smaller setups; for larger ones, you can use this together with the Mist Maker 3 Float. The float will ensure that everything sits at the correct water level for good operation. Keep the reservoir or water tank topped up nicely for continuous mist.

You can put it in a large propagator and watch as it generates a fine vapour that will float around the plants.

The high humidity mist produced in all these scenarios will ensure rapid growth and deliver much greater nutrient uptake than if your system tried to work without one. The level of nutrient transportation around plants also increases by using this method.

Step by Step Directions:

1. Put the product in the centre of your grow room.
2. Place it in a tank or bucket with your water level reaching a little above the ceramic plates in the mist maker.
3. Make sure that the water level is always topped up.
4. Use together with an optional float valve.
5. The product switches off if the water level gets too low to prevent overheating.
6. For optimum results, put a circulation fan next to the mister so that the mist is distributed evenly throughout the growing room or grow tent.
7. You could always use a timer for greater control of your mist maker.
8. Wipe the ceramic discs from time to time with a soft cloth to prevent them from becoming contaminated.

Specifications

• Cable length: 10m
• 3-head power rating: AC24v<68w
• Size: 68mm x h55mm
• Water consumption: >1200ml per hour
• Water temperature: + or – 5 50c
• Input: AC230-240v 50hz
• Output: AC24v 72w
• Weight: 1 kg

Accessories

This product comes with a set of replacement discs. The Mist Maker Humidifier 3 Replacement Discs set is specifically for the Mist Maker 3, with three discs in the pack.

Also available is the Mist Maker 3 Float, which works with the Mist Maker 3 and not any other humidifier product.

How Do I Buy The Mist Maker Humidifier 3?

You can easily buy the Mist Maker Humidifier 3 from our website.