Faran HR50 Humidification Kit

£639.95

The Faran HR50 Humidification Kit allows you to control humidity and temperature within your growing space. The hygrostat (humidistat) lets you easily set the required humidity level.

Add to Wishlist
Add to Wishlist

Faran HR50 Humidification Kit

The Faran HR50 Humidification Kit allows you to control humidity and temperature within your growing space. The hygrostat (humidistat) lets you easily set the required humidity level. This product is popular and known to be reliable and cost-effective. It uses centrifugal humidification instead of the less reliable ultrasonic method, and this requires only 90 watts of power to run very efficiently.

This product is ideal for use in any hydroponic growing system as it offers growers many worthwhile attributes, and these include the following:

  • It easily connects to a water source
  • Durable and sturdy, also easily portable with a carrying handle
  • Enhances the quality and weight of your yields
  • HR50 is suitable for growing rooms up to 100-150m2
  • It gives you accurate environmental control over humidity
  • It helps accelerate plant growth by providing the best environment for the circumstances
  • For optimal results, connect this to a reverse osmosis water filter
  • Easy to install by connecting it to a header tank
  • Delivers up to 4.5L per hour
  • Should not be used with hard water

How Does The Faran HR50 Humidification Kit Work?

The Faran HR50 Humidification Kit lets you control your plants’ ambient air humidity to reach their full potential.

Whatever you grow and the size of your growing space, humidity levels that are not right for your plants may, and usually will, spell disaster for their health and development. The quality and quantity of the yield at harvest will suffer. As plants transpire, they lose water through their stomata, tiny openings on the surfaces of the leaves. Should the moisture in the surrounding air be unacceptably low, the total amount of H2O released by your plants will be that much higher.

This release could impact your plants badly, resulting in wilting, stress and generally poor health. By boosting moisture levels in the air whenever this becomes necessary, you will positively impact your plants’ development, well-being and vitality.

This product connects to a water reservoir that supplies water to the unit. It works using a float-valve switch system; water is only sent to the unit when needed, so it can’t overflow. No pump is necessary as this is an entirely gravity-fed system, so there is no need for any further expenditure on electrical power.

The analogue humidistat lets you set the humidity level within your growing space, giving you total control; there is no need for manual water spraying. With this automated and integrated system, you’ll have complete peace of mind. Your plants will grow to be strong and vigorous.

How to Use?

Use the Faran HR50 Humidifier with filtered water only. Minerals within unfiltered water, such as tap water, will become vaporised with the water itself; these minerals will build up as a residue of salt deposits on your equipment. To set up, plug the power cable into your wall socket, top up the tank or reservoir with distilled or reverse osmosis (RO) water and set the dial on the unit to the required humidity level. Recommended humidity levels are:

  • For clones and Seedlings: 70 to 85%
  • For vegetation: 65 to 75%
  • For flowers: 45 to 65%

Specifications

HR-50 Humidifier:

Coverage: 100-150 sq. meters (1,176 to 1,614 sq. ft)
Power supply: 110V/50Hz or 220V/60Hz
Power consumption: 90W
Humidification capacity: 2,500~4,000cc per hour (1.05 gallons per hour)
Feedwater pressure: less than 5kg per sq. cm.
Dimensions: 370 by 370 by 480 mm (14.56″ by 14.56″ by 18.90″)

Analogue Humidistat HR-EHSA:

Measurement range: 10% ~ 80%(rh)
Accuracy: ±5%
Operation span: 3%
Operation method: ON/OFF
Capacity of micro switch: 2.2A
Temperature: 10~40°C
Sensor type: Nylon loop
Dimension: 140H x 95L x 45W (mm)
Power supply: 110V (220V) / 60Hz(50Hz)
Power cord: 2m

Kit Contains:

  • 1 x Faran HR50 Humidifier
  • 1 x Analogue Humidistat
  • 1 x 16mm-6mm Click-fit Tank Adaptor & Filter
  • 3 x Hard/Soft Wall Connecting Pipe
  • 1 x Flexi Tank 225L

Where Can I Buy The Faran HR50 Humidification Kit?

You can easily buy the Faran HR50 Humidification Kit from our online store.

Browse Caliponics
Basket

No products in the basket.