Faran HR15 Humidification Kit

The Faran HR15 Humidification Kit gives you control over the humidity levels in your growing space or tent. This kit has an analogue hygrostat (humidistat).

With the hygrostat, you can easily set the desired humidity level. These units are known to be very reliable and cost-effective when running. They are ideal for use in any hydroponic growing system.

This product offers hydroponic growers several features, and they include the following:

• It helps accelerate plant growth by providing the best environment for the circumstances
• Easy to install by connecting it to a header tank
• Durable and sturdy, also easily portable
• For optimal results, connect this to a reverse osmosis water filter
• Has either a digital or analogue hygrostat, which auto-switches it on and off as needed
• Enhances moisture in the growing space by up to 1.5 litres/hour
• Can very adequately cover growing areas of up to 30m2
• It easily connects to any water source
• Should not be used with hard water

How Does it Work?

This well-tried, professional humidifier takes its water from a reservoir and then releases it into the air as water vapour, sustaining optimal humidity levels within that space. It has a 1.5 litre per hour emission rate, ideal for growers with larger than average growing rooms.

As plants transpire, they will lose water through their stomata, which are tiny openings on the surfaces of the leaves. Should the moisture in the surrounding air be too low, then the amount of water released by plants will be considerably higher, compacting the plants, resulting in wilting, stress and overall poor health.

You will positively impact your plant development and vitality by boosting the moisture levels in the surrounding air whenever this is needed.

This product connects to a water reservoir which supplies the water directly to the unit. There’s a float-valve switch system, so water is only sent to the product when needed, so it cannot overflow.

No pump is necessary as it’s an entirely gravity-fed system, so there’s no need for further expenditure on electrical power. It plugs into a hygrostat and then straight into the wall to regulate the HR-15 so that it only releases moisture into the air when this becomes necessary.

This product works with water filtered through a reverse osmosis unit. Filtering water removes any excess salts that may damage the internal parts and cause problems within your growing space. These unwanted salts can even run the risk of corroding your reflectors, which will likely cause a fall in yields.

How to Use the Faran HR15 Humidification Kit?

The Faran HR15 Humidification Kit needs to connect to a header tank or reservoir, plug the power lead into a wall socket, top up your reservoir with distilled or reverse osmosis (RO) water and set up the dial to the level of humidity that you require. Recommended humidity levels are as follows:

• Clones or Seedlings: 70 to 85%
• Vegetation: 65 to 75%
• Flowers: 45 to 65%

Specifications

Humidifier:

• Coverage: 15-30 sq. meters (160-320 sq. ft)
• Power supply: 220V/60Hz
• Power consumption: 90W
• Humidification capacity: 1,500cc/hour (0.4gallon per hour)
• Dimensions: 310 X 310 X 470 mm (12.20″ X 12.20″ X 18.50″)

Analogue hygrostat:

• Measurement range: 10% ~ 80%(rh)
• Accuracy: ±5%
• Operation span : 3%
• Operation method : ON/OFF
• Capacity of micro switch : 2.2A
• Temperature : 10~40°C
• Sensor type : Nylon loop
• Dimension : 140H x 95L x 45W (mm)
• Power supply : 110V (220V) / 60Hz(50Hz)
• Power cord : 2m

Kit Contents:

• 1 x Faran HR15 Humidifier
• 1 x Analogue Humidistat
• 1 x 16mm-6mm Click-fit Tank Adaptor & Filter
• 3 x Hard/Soft Wall Connecting Pipe
• 1 x Flexi Tank 100L

How Can I Buy The Faran HR-15 Humidifier with Analogue Hygrostat?

You can buy the Faran HR-15 Humidifier with Analogue Hygrostat without difficulty from our site.