Mist Maker Humidifier 5

£109.95

Mist Maker Humidifier 5 is a powerful and compact resource that supplies water vapour to your growing room or grow tent at the rate of 400ml per hour. It delivers droplets that are very fine and increases the humidity of dry air.

Add to Wishlist
Add to Wishlist

Mist Maker Humidifier 5

The Mist Maker Humidifier 5 is a powerful and compact resource which supplies water vapour to your growing room or tent.

This product is perfect for use in hydroponic growing setups and has some handy qualities and features; and these include the following:

  • Negative ion Ionizer as well as a humidifier
  • Cool-running and provides 100% humidity if necessary
  • Maintains optimum growing environment needed for seedlings and cuttings
  • A specially coated disc means fewer frequent changes and lasts up to 2000 hours.
  • No special wiring is required as it plugs right into a standard mains socket.
  • Put in a propagator and see vapour float around your plants or cuttings.
  • It makes use of ultrasound, with no heat or chemicals used.
  • An impressive output of 400ml per hour
  • It gives your growing area a pleasantly humid environment.
  • Very quiet when in operation
  • Mains cable length of 10m

How Does it Work?

The Humidifier 5 produces water vapour using the ultrasonic vibration method; the droplets it makes are tiny – just one micron wide – and a multitude of these will correct the air’s humidity level, which is too arid.

These units are cool-running and can provide very high levels of humidity if required to do so. This product can maintain the optimum growing conditions for your plants right through the vegetative stage of their life cycle, as well as for seedlings and cuttings.

You can place this in a propagator and watch the water vapour float around the plants or cuttings, producing fast growth rates and delivering and transporting high levels of nutrient uptake.

This humidifier is a cool-running unit in a sector that predominantly features some heating element. It offers quiet operation and does not require special wiring because it plugs straight into a standard mains socket.

It uses a special disc treated with a coating that needs changing less often and can last 2,000 hours.

The difference between the Mist Maker Humidifier 3 and the Mist Maker Humidifier 5 is the unit’s number of discs or heads. The smaller model has three, while its bigger brother here has five.

In plants’ vegetative phase, a relative humidity (RH) of 50 to 70% needs reaching for your plants to transpire to their fullest extent. Clip-on fans work well to help move the humid mist around the growing room.

How to Use?

The Humidifier 5 works by putting it in a saucer or tray of water for smaller hydroponic spaces; for larger setups, you can use this together with the Mist Maker 5 Float.

This float will ensure that everything sits at the correct water level for good operation. Keep the reservoir or water tank well topped up to produce a continuous mist. You can put it in a large propagator and watch as it generates a fine vapour that will float around the plants, seedlings and cuttings.

The high relative humidity mist created in all these scenarios will ensure rapid plant growth and deliver a much higher nutrient uptake than if your system attempted to work without the added benefit of one of these.

Using this method enhances the level of nutrient transportation around plants.

Step by Step Directions:

  1. Put the product in the centre of your growing room.
  2. Place it in a tank with your water level above the ceramic plates in the mist maker.
  3. Make sure that the water level is topped-up at all times.
  4. Use together with an optional float valve.
  5. The product will switch off if the water level becomes too low; this prevents over-heating.
  6. You could put a circulation fan next to the misting unit to distribute the mist evenly throughout your growing room or tent for optimal results.
  7. You could use a timer for greater control of your misting unit.
  8. Wipe the ceramic discs from time to time with a soft cloth to prevent them from becoming contaminated.

Specifications

  • Cable length: 10m
  • 3-head power rating: AC24v<68w
  • Size: 68mm x h55mm
  • Water consumption: >1600ml per hour
  • Water temperature: + or – 5 50c
  • Input: AC230-240v 50hz
  • Output: AC24v 72w
  • Weight: 1 kg

Accessories

This product comes with a set of five replacement discs. The Replacement Disc set is specifically for the Mist Maker 5. The discs have a lifespan of 5,000 hours, depending on the water quality.

Also available is the Float for Mist Maker 5.

How Do I Buy The Mist Maker Humidifier 5?

You can easily buy the Mist Maker Humidifier 5 from our website.

Browse Caliponics
Basket

No products in the basket.