GrowMax Power Grow 500 Reverse Osmosis Filter

£229.95

The GrowMax Power Grow 500 Reverse Osmosis Filter System is the ideal solution to the problems you experience if you live in an area with hard water.

Add to Wishlist
Add to Wishlist

GrowMax Power Grow 500 Reverse Osmosis Filter

The GrowMax Power Grow 500 Reverse Osmosis Filter System is the ideal solution to the problems you experience if you live in an area with hard water.

This system will filter out all of the impurities which make the water the way it is, to the noticeable improvement of your plants and the soundness of the equipment you use.

To establish the water type in your region, visit the following page and enter your postcode.

This product is perfect for growers using hydroponic systems in hard water areas as it presents the following worthwhile attributes:

  • Perfect for use with misting and humidifying equipment
  • Assists in creating nutrient solutions which have a more stable pH
  • Ideal for reducing your water’s hardness as it lowers EC
  • Eliminates 95% of the salts present in tap water
  • Cartridges will last six months before needing to be replaced
  • Assists in preserving microbial activity in soil for far better yields
  • It helps prevent limescale building up on your equipment
  • Able to remove hazardous heavy metals
  • Environmentally friendly coconut carbon filters with improved absorption attributes
  • It makes use of 1/4 inch pipe and fittings

How does this Reverse Osmosis Filter System Work?

This Reverse Osmosis Filter System removes chemicals and contaminants contributing to hard water and 99% of the mineral salts.

The water that this ingenious system produces for you is ideal for use with misters and humidifiers as it leaves behind no powdery residues, thereby preserving the usefulness and integrity of all your hydroponic equipment.

This product removes salts, hazardous heavy metals, unwanted sediment, rust and oxidisation, dirt, herbicides, pesticides, benzenes, and many organic contaminants, including toluene, THMs, oils, detergents and PCBs.

How do I use this Filter System?

The Power Grow 500 System is relatively straightforward if you follow the step-by-step directions.

Firstly, you should push the 3/8″ white inlet tubing into the 3/8″ fitting on the filter housing on the right side. Then connect the 1/4″ blue purified water tubing to the outlet of the shut-off valve and the 1/4″ black waste water tubing to the outlet of the flow restrictor.

Now you can connect the garden hose adaptor to the source water on the other end of the supplied 3/8″ inlet tubing.

When the system starts up, you should turn the source water on slowly until the carbon and sediment filters have water within their housings. Then you open your source water up, at most 80 psi.

Remember to flush the system out thoroughly for 15 minutes when you first use it and again when you need to replace the membrane.

Specifications

The whole package contains the following:

  • Main unit
  • Inlet tubing with garden 
hose connector
  • Sediment filter
  • Green coconut carbon filter
  • Reverse osmosis membrane
  • Pressure gauge
  • Outlet tubing
  • Shut-off valve

Water conditions:

  • Temperature: 25°C
  • Pressure: Minimum. 3 kg – Maximum. 6 kg
  • Quality: EC (500 TDS or PPM 0.7 EC)
  • Other conditions may reduce water production
  • Replace cartridges for every 4,000 litres of water filtered

Where can I buy a GrowMax Power Grow 500 Reverse Osmosis Filter System?

You can easily buy a GrowMax Power Grow 500 Reverse Osmosis Filter System from our online store.

Browse Caliponics
Basket

No products in the basket.