SANlight Q6W Gen 2 245w LED

£569.95

The SANlight Q6W Gen 2 245w LED Grow Light uses Osram 2mm2 chip technology to provide a full broadband light spectrum distribution which will still run at 90% after a lifetime of 100,000 hours.

SANlight Q6W Gen 2 245w LED

The SANlight Q6W Gen 2 245w LED Grow Light uses Osram 2mm2 chip technology to provide a full broadband light spectrum distribution which will still run at 90% after a lifetime of 100,000 hours.

This impressive workhorse is highly suited for use in hydroponic growing spaces and tents. This product is ready to dim, which means growers can control the light intensity using a separate dimmer at all stages of their plants’ development.

SANlight is well aware that growing conditions change over time and that plants may need more light at a later stage. This product’s lights offer Ready-to-Boost functionality, allowing you an extra 10% of light output.

The Q6W LED Grow Light features several features and attributes, and these include the following:

  • Uses Osram 2mm2 Chip technology
  • The Ready-To-Boost facility provides 10% more light
  • The Ready-To-Dim facility offers a similar function
  • The PPF is 624 over a range of emission wavelengths
  • Power Factor is greater than 0.95
  • Module efficiency 2.7μmol/Joule
  • Broadband continuous and even light spectrum
  • The beam angle is at 90°
  • Power Consumption of 245w
  • Ability to daisy-chain multiple units together
  • Light covers a 1000mm by 1000mm footprint
  • 3-year manufacturer’s guarantee

How does it work?

This LED uses secondary optic technology to ensure that 95% of photons go onto your plants and not onto the sidewalls of your growing space. It provides a full light spectrum during the vegetative and flowering stages of your plant’s life cycle, resulting in large yields at harvest.

Growers may gain these impressive results by using only a tiny proportion of the power usually necessary to achieve this with high-pressure sodium lights. The LED modules each feature aluminium heat sinks, which passively cool the diodes, even though these may be running at high temperatures. This feature also helps save on energy costs and gives you additional savings on your extraction costs because of the smaller amount of heat generated.

How to Use?

The SANlight Q6W works perfectly well in a 1m2 grow tent. It has three eyelets for easy hanging at each end and central eyelets for hanging flat. You may also position it at a slight slant by using side eyelets which may be helpful in an arrangement when using several lights.

SANlight recommends that you hang the unit no lower than 350mm, which is probably the optimum height for a tent measuring 0.8m2. But for a 1m2 tent, it’s recommended that you go for about 450mm, and higher for younger plants.

The units may be daisy-chained together using Lamp-to-Lamp leads. Each lead will join two fixtures and receive power via power cables.

Note: You may like to read our article about The Best Lights for your Hydroponic System. It explains all the different types of grow lights, their pros and cons, and why one type is better than another for specific purposes.

Specifications

  • Length: 783 mm
  • Wattage: 245 watts
  • Light source wattage: 245 Watts
  • Finish type: Aluminium
  • Weight: 13.56 Pounds
  • Warranty: 3-year manufacturer’s warranty

Where Can I Buy the SANlight Q6W Gen 2 245w LED Grow Light?

You can easily buy a SANlight Q6W Gen 2 245w LED Grow Light from our website.

Browse Caliponics
Basket

No products in the basket.