SANlight Gen2 Evo + Q-Series Lamp to Lamp Lead
The SANlight Gen2 Evo + Q-Series Lamp to Lamp Lead will connect SANlight LED lamps to H distribution blocks and connect H distribution blocks to other H distribution blocks. Allowing as many as four grow lamps to run from one plug socket and up to 7 LED lights to daisy-chain together.
They are available in 1 or 2-metre lengths and are ideal for use in hydroponic growing systems.
This Lead offers many worthwhile attributes, including the following:
- Compatible with a distribution block to daisy chain an extra lamp from one mains lead
- Permits the daisy-chaining together of up to 7 SANlight Q-Series LED lamps
- Considerably reduces the quantity of mains lead required
- Cables and connectors are all of the highest quality
How Does The SANlight Gen2 Evo + Q-Series Lamp to Lamp Lead Work?
The SANlight Gen2 Evo + Q-Series Lamp to Lamp Lead will allow you to daisy chain up to 7 different LED Gen 2 lamps together. It will also enable you to connect the LED lamps to a distribution block and to join distribution blocks to each other.
Use one extension lead for each LED grow lamp in any multi-light system, and you’re also going to need a fifth extension lead for a setup consisting of four LED lights; that is, one to connect the two distribution blocks.
Running individual power leads to several LED fixtures can get quite messy, and you may need quite a few sockets and cables. Daisy-chaining allows you to connect seven units so that these may all receive power from just one socket.
Use a distribution block and an extension cable for each extra unit. Altogether up to seven Gen2 Q-Series LED lamps may power from one mains socket.
The SANlight Q-series Gen 2 LED grow lamps are wonderfully efficient. If you have a setup consisting of multiple units, each of these grow lamps will usually need its own electrical power feed.
These extension cables and their distribution blocks will allow up to seven such Gen2 units to be connected (daisy-chained), needing a feed from only one mains socket. This will tidy and simplify the cabling arrangements in your growing room and keep everything a lot more tidy. You will not need an extension cable, only a power lead if you use only one lamp.
How Do I Use The SANlight Lamp to Lamp Lead?
It’s possible to use the SANlight Lamp to Lamp Lead so that a maximum of seven such units are connected and powered from just one mains outlet. As an alternative, use an extension lead to extend the electricity feed to the SANlight unit.
Please note that this is for the Gen 2 series and EVO Series LEDs and not the Gen 1 series.
Where Do I Buy The Lamp to Lamp Lead?
You can buy the Lamp to Lamp Lead without difficulty from our site here.