METU Pro Fast Clamp

From: £12.95

The METU Pro Fast Clamp is a top-quality product made of durable galvanised steel with polyethylene foam. Fixing it requires just one bolt, which ensures quick and effortless fitting.

Purchase this item and get 12-27 Points - a worth of £1.20-£2.70
Purchase this item and get 12-27 Points - a worth of £1.20-£2.70
Add to Wishlist
Add to Wishlist

METU Pro Fast Clamp

The METU Pro Fast Clamp is ideal for connecting your ventilation equipment such as fans, filters, etc.

The clamp is a top-quality product made of durable galvanised steel with polyethylene foam. Fixing it requires just one bolt, which ensures quick and effortless fitting.

The polyethylene foam will accommodate and seal up to 4mm of variability in duct sizes. This product will form a solid mechanical connection which means that you can connect carbon filters directly to your fan without needing to use two clamps with yet another length of ducting.

This product is ideal for use in all types of hydroponic growing systems.

The Metu Clamp has various qualities and attributes, such as:

  • Able to form an airtight seal
  • Made from premium quality materials
  • Completely reusable
  • Made in Germany
  • Assists in connecting carbon filters to the fan
  • Part of the premium G.A.S fan accessories range
  • Easy to install and use
  • A single screw secures the joint
  • Includes polyethylene foam

How Does it Work?

The Metu Fast Clamp is often considered the ultimate tool to assist you in connecting the various components of your ventilation system. This premium quality clamp is manufactured from galvanised steel and contains polyethylene foam. It uses a 1-bolt fixing mechanism which will guarantee a quick fitting. The foam can seal a difference or variation of up to 4 mm in duct sizes. Using this, you’ll be able to connect carbon filters directly to your fan.

How to Use?

Use the clamp on fans, inline ozone generators, carbon filters and silencers. It’s better that you use these to connect your fan with your filter than yet more lengths of ducting, as they are much more secure and produce far less drag.

To use these, you need to measure the flange size of either the carbon filter or the inline fan to ensure that the clamp can form a good, tight seal between these parts. When you know the size of the flange, then you’ll need to match this size with the size of the clamp (and seven different sizes are available, so there’s bound to be one to suit your needs). For example, a 100mm (4 inch) filter would need a 100mm clamp.

The specific sizes available are as follows:

  • 4″/100mm
  • 5″/125mm
  • 6″/150mm
  • 8″/200mm
  • 10″/250mm
  • 12″/315mm
  • 14″/355mm

Please use the menu above to indicate the size(s) you require when ordering.

To connect the clamp to your fan or carbon filter, you unscrew the single bolt on the clamp’s side using an Allen key. This process allows room for the clamp to glide over the flange effortlessly. Then you push the clamp onto the fan, or carbon filter, then insert the ventilation hardware you want to connect to the other side. You then tighten the bolt to make the equipment safe and secure.

Please note: We recommend that you don’t use this product to clamp to ducting; for this task, you’d be better off with a G.A.S Duct Clip (Quick-Release).

Where Can I Buy the METU Pro Fast Clamp?

You can buy a METU Pro Fast Clamp easily from our site.

Browse Caliponics
Basket

No products in the basket.